# How To: Make Vessel Movements (Assembly)

_By Brandon Munn · Dec 2, 2024_

Once you are finished with a **Vessel** in **Production,** you will need to tell the system that the liquid has been moved.

Go to **Production - Vessel Summary,** click **Actions** on the relevant **Vessel** and select **Add Vessel Movement.**

1.  Enter the **\*Volume Leaving** the Vessel.
    
2.  Select either **Estimated Vessel Volume** or enter a specific **Measured Vessel Volume** after the liquid has left the vessel.
    
3.  Select which **Vessel** the liquid is moving to from the dropdown at the top right.
    
4.  Now enter the **Volume Arriving** at the new **Vessel.**
    
5.  Select either **Estimated Vessel Volume** or enter a specific **Measured Vessel Volume** after the liquid has arrived.
    
6.  Add any notes and confirm the time and date.
    
7.  Click **Add Movement.**
    

![](https://vault.featureos.app/uploads/attachment/upload/301756a105ba947cdcd2c57cdeecb575.png)

#### **Emptying Vessels and Removing from Assembly.**

Once you have made a movement from a **Vessel,** you may want to specify to the system that it is now completely empty.  
   
Go to **Production** - **Vessel Summary,** select **Actions** on the Vessel in use and click **Empty Vessel,** then click **OK** to confirm.

If you are no longer using this **Vessel** for its current **Batch** you will need to release it for use again for new **Batches.**

Go to **Production** - **Vessel Summary,** click **Actions** on the relevant **Vessel**  then click **OK** to confirm.

**Combining Batches**

If you want to make a **Vessel Movement** to combine different **Batches,** you will need to make an **Output** to an **Existing Assembly.** For full instructions go to the **How to Output from Vessels** link below.

[View this article on the web](https://premier-systems-ltd.featureos.help/en/articles/how-to-make-vessel-movements)